psd module c10443 series integrates a psd for precision photometry with low-noise amp in a compact case www.hamamatsu.com 1 optical axis alignment easy handling range nder high precision analog voltage output three-dimensional measurement only half size of a business card: 34 (w) 44 (h) 40 (d) mm length measurement liquid level sensors distortion measurement three-types with different active areas available specifications (ta=25 c, vcc=12 v) electrical and optical characteristics (ta=25 c, vcc=12 v) parameter symbol condition min. typ. max. unit operating supply voltage vcc 5 - 12 v current consumption icc dark state - - 2 ma output amplitude voltage vout * 5 0 - -vcc + 1.1 v output noise voltage vn dark state - 1 - mvp-p offset voltage vos dark state -5 - +5 mv cut-off frequency fc -3 db - 16 - khz * 5: 0 v in dark state. a negative voltage output appears when light is input. absolute maximum ratings (ta=25 c) parameter symbol value unit supply voltage vcc max 13 v operating temperature * 1 topr 0 to +50 c storage temperature * 1 tstg -10 to +60 c * 1: no condensation features applications psd modules contain a high-precision two-dimensional psd (position sensitive detector) and a low-noise ampli er, and are able to perform accurate distance measurement. using a psd module with a dedicated signal processing unit (c10460) allows ob- taining distance information easily. parameter symbol condition c10443 unit -01 -02 -03 built-in psd - two-dimensional psd - photosensitive area - 4 4 9 9 12 12 mm spectral response range 320 to 1100 320 to 1060 nm peak sensitivity wavelength p 960 920 nm photosensitivity s = p -60 mv/ w maximum input optical power - = p 167 w position detection error * 3 e 70 typ. 150 max. 150 typ. 250 max. 150 typ. 250 max. m position resolution * 4 r =-10 v 0.5 1.0 1.4 m * 3: reference value. values may vary depending on operating environment. position detection error is speci ed within a circular range of 80% from the center of the active area to the edge. recommended light spot size: 0.2 mm or more * 4: reference value. values may vary depending on operating environment. is the sum of each output voltage and calculated as follows. = v x1 + v x2 + v y1 + v y2
psd module c10443 series 2 spectral response example of position detectability (ta=25 c, =900 nm, spot light size: 0.2 mm) wavelength (nm) photosensitivity (mv/w) 0 300 1100 400 600 700 500 800 1000 900 -80 -10 -20 -30 -40 -50 -60 -70 (typ. ta=25 c) c10443-01/-02 c10443-03 scan interval 0.4 mm scan interval 1 mm kaccb0151ea kpsdc0064ea kpsdc0065ea c10443-01 c10443-02
psd module c10443 series 3 block diagram conversion formula dimensional outline (unit: mm) output v x1 output v y1 output v x2 output v y2 dual power supply 5 to 12 v com y1 y2 x1 x2 +vcc -vcc gnd 2-d psd reference voltage circuit i-v conversion amplifier x = (v x2 + v y1 ) - (v x1 + v y2 ) v x1 + v x2 + v y1 + v y2 l 2 y = (v x2 + v y2 ) - (v x1 + v y1 ) v x1 + v x2 + v y1 + v y2 l 2 x, y: position (mm) of light spot relative to center of psd photosensitive area l: 4.5 mm (c10443-01) 10 mm (c10443-02) 14 mm (c10443-03) 44 34 40 6.3 37 17 20 3 (2 ) m2 depth 5 center of psd photosensitive area photosensitive area size c10443-01: 4 4 c10443-02: 9 9 c10443-03: 12 12 photosensitive surface m4 depth 5 connector hr-10a-10r-10pb hirose electric 10-pin, male 14 line interval 1 mm kpsdc0020ea kaccc0345ea kacca0193ea c10443-03
cat. no. kpsd1027e04 dec. 2011 dn psd module c10443 series www.hamamatsu.com hamamatsu photonics k.k., solid state division 1126-1 ichino-cho, higashi-ku, hamamatsu city, 435-8558 japan, telephone: (81) 53-434-3311, fax: (81) 53-434-5184 u.s.a.: hamamatsu corporation: 360 foothill road, p.o.box 6910, bridgewater, n.j. 08807-0910, u.s.a., telephone: (1) 908-231-0 960, fax: (1) 908-231-1218 germany: hamamatsu photonics deutschland gmbh: arzbergerstr. 10, d-82211 herrsching am ammersee, germany, telephone: (49) 8152- 375-0, fax: (49) 8152-265-8 france: hamamatsu photonics france s.a.r.l.: 19, rue du saule trapu, parc du moulin de massy, 91882 massy cedex, france, teleph one: 33-(1) 69 53 71 00, fax: 33-(1) 69 53 71 10 united kingdom: hamamatsu photonics uk limited: 2 howard court, 10 tewin road, welwyn garden city, hertfordshire al7 1bw, unit ed kingdom, telephone: (44) 1707-294888, fax: (44) 1707-325777 north europe: hamamatsu photonics norden ab: smidesv?gen 12, se-171 41 solna, sweden, telephone: (46) 8-509-031-00, fax: (46) 8 -509-031-01 italy: hamamatsu photonics italia s.r.l.: strada della moia, 1 int. 6, 20020 arese, (milano), italy, telephone: (39) 02-935-81- 733, fax: (39) 02-935-81-741 china: hamamatsu photonics (china) co., ltd.: 1201 tower b, jiaming center, no.27 dongsanhuan beilu, chaoyang district, beijing 100020, china, telephone: (86) 10-6586-6006, fax: (86) 10-6586-2866 product specifications are subject to change without prior notice du e to improvements or other reasons. before assembly into fi nal products, please contact us for the delivery specification sheet to check the latest information. type numbers of products listed in the delivery specification sheets or supplied as samples may have a suffix "(x)" which means preliminary specifications or a suffix "(z)" which means developmental specifications. the product warranty is valid for one year after delivery and is limited to product repair or replacement for defects discovere d and reported to us within that one year period. however, even if within the warranty period we accept absolutely no liability for any loss caused by natural d isasters or improper product use. copying or reprinting the contents described in this material in whole or in part is prohibited without our prior permission. information described in this material is current as of december, 2011. connection example accessory * accessory of a signal processing unit for psd module c10460 signal processing unit for psd module c10460 rs232c cable ac adapter * voltmeter, oscilloscope, etc. pc connection cable for psd module * cable for analog output * psd moudle c10443 secure with optical bench rod, etc. 1 m connector hr10a-10p-10s (hirose electric 10-pin, female) kaccc0349ec kacca0194ea cable: length 1 m (one end of cable is cut off.) 4
|
